Control Panel Buttons - Welch Allyn 6702 Mode D'emploi

Directions for use

Control panel buttons

Button
ZERO
Green LED
indicator
Power button
SEND DATA
PRINT
LB / KG
REWEIGH
HEIGHT / BMI Press this button to calculate a BMI measurement or enter a patient's height.
RECALL
Function
Press this button to reset the scale value to zero.
This button can also be used for a tare function to tare out the weight of a chair, wheelchair, or other
components you wish to be deducted from the patient's weight
This area displays the patient measurement, as well as indicates the measurement units, AC power,
low battery, prior weight, and data transmission.
Press this button to turn the scale on.
Press and hold this button to turn the scale off.
Press this button to send measurement data when the scale is connected to a computer, a Welch Allyn
®
Connex Vital Signs Monitor or a Welch Allyn Connex
Press this button to print the current measurements.
Press this button to change the scale between kilograms and pounds.
Press this button to retake the patient's weight or to perform a new weighing cycle.
Press this button to recall the previously stored scale reading.
®
Spot Monitor.
Introduction 7