Technical Data; Technical Information - PROLUMIA Prodisc II Mini Manuel D'utilisation

ATTENTION
Please read the following instructions carefully to ensure that mounting operation will be carried out correctly. These instructions
should be properly preserved for future reference.
CAUTION
1. The product must be installed by qualified technicians. The power supply must be cut before installation.
2. The installation wiring must be 2x 1.0 mm² at least and wired in accordance with the latest IEE electrical regulations or the national requirements.
3. Do not touch the electronic circuit and its components.
4. Do not touch the LEDs while installing or maintaining.
5. This product contains a light source of energy efficiency class D.

TECHNICAL DATA

Supply voltage: AC 220-240V 50/60Hz
Light source: LED SMD2835
Operating temperature: -20°C – +50°C
Color temperature switchable:
3000K / 4000K

TECHNICAL INFORMATION

Article no. Voltage
40009441 220-240V 50/60Hz
40009451 220-240V 50/60Hz
40009401 220-240V 50/60Hz
40009411 220-240V 50/60Hz
40009461 220-240V 50/60Hz
40009471 220-240V 50/60Hz
MICROWAVE SENSOR - DESCRIPTION
Detection zone max. (d x h): 14m x 6m
Detection sensitivity: 25% - 100%, adjustable
Hold time: 5sec - 30min, adjustable
Daylight 1: 5 - 15Lux, adjustable or disable
Daylight 2: 35 - 150Lux, adjustable or disable
(with daylight priority)
Hold time: 5 - 30sec - 1 - 5 - 15 - 30min (adjustable)
Hold time orientation lighting:
0 - 10 - 20 - 30 - 60 - ∞ min (adjustable)
Mounting height: 6m max.
Motion detection: 0.5 ~ 3m/s
Detection angle: 150° (wall installation),
360° (ceiling installation)
8
Prodisc II Mini
LED type Power Max. light output
SMD2835 9W 900Lm
SMD2835 10W 900Lm
SMD2835 14W 1500Lm
SMD2835 15W 1500Lm
SMD2835 24W 3000Lm
SMD2835 25W 3000Lm
Wall mounting detection area (Unit: m)
Suggested installation height: 1 - 1.8m
www.prolumia.com
Prodisc II
MW sensor
-
Yes
-
Yes
-
Yes
Ceiling mounting detection area (Unit: m)
Suggested installation height: 2.5 - 6m
Prodisc II Maxi