Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Locking the menu:
Hold down the "SET" button (system setup) until the "Lock Select" indicator comes on. Press on the "▲" or
"▼" button to select the "LOCKON" function or "LOCOFF" function.
Programming the bodypack receiver
Switching on the bodypack:
Switch your bodypack receiver on by turning the volume knob clockwise.
Do the opposite to switch off.
Selecting the group and channel for your system:
Press the "SET" button (system setup) and the "Group" indicator will flash on the screen. Press on the "▲"
or "▼" button to select the number of the appropriate frequency group.
Press the "SET" button again and the "CHANNEL" indicator will flash on the screen. Press on the "▲" or
"▼" button to select the appropriate channel.
FOR INFORMATION: when you have several systems on the go, make sure that all your systems are using
the same frequency group and select a different channel number for each system.
Illustrations et photos non contractuelles
Actual product(s) may differ from illustrations/photographs used
Copyright © 2017 IPE Music/Prodipe
Page 21
Publicité
Table des Matières
