Cleaning And Care; Disposal Considerations; Declaration Of Conformity - oneConcept 10028678 Mode D'emploi

5. Lift the kettle from the power base and then pour the water.
Note: operate carefully when pouring the water from your kettle, don't touch kettle
when the water is boiling, as boiling water will scald. The boiling process can be termi-
nated at any time by lifting the kettle off the Power Base or pressing the Switch to "0"
position.
Important Hints on Use
• Never operate the appliance empty. In the event of this case occurred, the thermal cut-off
inside the kettle would operate to cut off power automatically. Unplug the appliance and
let it completely cool down.
• The fi lter must be in place during operation otherwise water spillage may occur.
• If appear kettle have crack, forbids the use of kettle.
• Remove the plug from wall outlet and let the appliance completely cool down before cleaning.
• Do not immerse power cord, kettle and Power Base in water.
• In order to maintain the polish of the outer surface, do not use abrasive cleaner to wipe
the stainless steel housing.
According to the European waste regulation 2002/96/EC this symbol
on the product or on its packaging indicates that this product may not
be treated as household waste. Instead it should be taken to the ap-
propriate collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling
of this product, please contact your local council or your household was-
te disposal service.
Producer: CHAL-TEC Vertriebs- + Handels GmbH, Wallstraße 16, 10179 Berlin, Germany.
Dieses Produkt entspricht den folgenden Europäischen Richtlinien:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)

Cleaning and Care

Disposal Considerations

Declaration of Conformity

7