Insertingthebatteryintotheremotecontrol
The battery tray is located on the back at the bottom of the remote control.
2
1
Tab
Push the tab towards the right, and then pull the battery tray out towards you.
1.
Insert 1 x 3 V CR2032 battery (included), respecting the polarity (+/-) indicated (+ pole
2.
facing up).
Put the battery tray back in correctly by sliding it towards the top of the remote control.
3.
If you do not use the appliance for long time, remove the battery from the
remote control.
USING THE REMOTE CONTROL
Point the remote control towards the infrared sensor (7) located on the control panel so that
•
the latter receives the transmitted information.
Make sure that there are no obstacles between the remote control and the infrared sensor.
•
The remote control has a range of about 5 meters.
•
Battery tray
31
V.4.0
beforeuse