Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CONFIGURING THE MODULE
A
0 _ _ _
B
Configuration
Language
Information
Display
D
Information
Version
ID
BACK
F
Information
Version
ID
BACK
Accessing configuration mode
Press and hold the
buttons at the same time until the password entry screen shown
in figure A appears (default password 1234).
Use the
buttons to enter the first of the four numbers that make up your password.
Press
to confirm and move on to the next number.
Once you have entered the correct password, you can access the dedicated module con-
figuration section B.
Use the
buttons to scroll through the various parameters to configure. Press
access the configuration options.
C
Language
Italiano
English
Français
E
Version
1.00.001 - 1.05
1.00.000
1.00.003 - 1.08
G
ID
SN: 123456
IP: 192.168.12.1
255.255.255.255
[Language]
Scroll through the list of available languages
C using the
buttons. Press
the one you require and go back to the previ-
ous menu.
Select
and press
to go back to the pre-
vious menu without changing the existing pro-
gramming.
[Information] D
The menu provides technical information re-
garding the display module and the other mod-
ules installed on the entry panel.
[Version] E
The
buttons allow you to scroll through
the list and view the firmware version of the
modules installed on the entry panel.
Key to symbols
audio or audio/video
display
RFID
Select
and press
to go back to the pre-
vious menu.
[ID] F
The information contained in this menu refers
to the audio or audio/video module installed on
the entry panel.
SN: identification code (also found on the back
of the module),
IP: IP address of the module and subnet mask
(information only found on IP modules).
Select
and press
to go back to the pre-
vious menu.
to
to choose
pushbutton panel
keypad
info
Publicité
Table des Matières
