General Warnings; Technical Data - Bpt MTMDY Manuel D'installation Et De Programmation

General warnings

Important personal safety instructions: READ CAREFULLY!
•
Installation, programming, commissioning and maintenance must only be performed by qualified and experienced personnel in
•
compliance with applicable regulations.
Wear antistatic shoes and clothing if working on the control board.
•
Do not obstruct ventilation or heat dissipation openings or vents.
•
Keep hold of these warnings.
•
Always disconnect the electrical power supply during cleaning or maintenance.
•
This product should only be used for the purpose for which it was explicitly designed. Any other use is considered dangerous.
•
The manufacturer declines all liability for any damage as a result of improper, incorrect or unreasonable use.
•
DESCRIPTION
Display module connected and powered via BUS.
Module assembly or removal must take place while the entry panel is not powered.
3
❶ Display
2 Navigation buttons
3 Outlets for connection to other modules

Technical data

1
Type
Power supply (V DC)
MAX current draw (mA)
MIN current draw (mA)
Storage temperature (°C)
Operating temperature (°C)
2
Protection rating (IP)
MTMDY
10.7 to 18
250
55
-25 to +70
-25 to +55
54