Removing Stands; Inspection - CERTIFIED 299-3046-4 Manuel D'instructions

6
7
model no. 299-3046-4 | contact us 1-866.523.5218

REMOVING STANDS

• Raise the vehicle high enough to clear the stands.
• Remove the stands being careful not to crawl under the vehicle.
• Slowly lower the vehicle to the ground.

INSPECTION

Periodically inspect the stands for broken on cracked welds, broken or worn teeth on the ratchet
mast or locking mechanism, and loose or missing parts. If you notice anything, remove the stands
from service until repaired or replaced.