EN
38
Automatic timer (TIMER)
Automatic switch-off:
When the appliance is turned on: Press this button to set the automatic switch-off.
T-OFF" and "H" flash on the display. Press the + and - buttons within 5 seconds to
set the time for the switch-off. Press + and - to increase or decrease the time by
1/2 hour. Press and hold + or - for 2 seconds, the time value changes quickly. Then
press TIMER to confirm. "T-OFF" and "H" stop flashing.
Automatic switch-on:
With the appliance switched off: Press this button to set the automatic switch-on.
T-OFF" and "H" flash on the display. Press the + and - buttons within 5 seconds to
set the time for switching on. Press "+" and "-" to increase or decrease the time by
1/2 hour. Press and hold + or - for 2 seconds, the time value changes quickly. Then
press TIMER to confirm. "T-OFF" and "H" stop flashing.
Cancellation of automatic timer:
When the automatic timer is set, press TIMER to see the remaining time. If you
press the TIMER button again within 5 seconds, you cancel this function.
Note: The setting range is between 0.5 and 24 hours. The time interval between
two entries must not exceed 5 seconds, otherwise the remote control will exit
the setting mode.
Button combinations
child lock
Press "+" and "-" simultaneously to switch on the child lock. When the child lock
is switched on, the remote control displays "LOCK". If you press buttons now, the
remote control does not send a signal.
Change the temperature display between °C and °F:
With the appliance switched off, press the - and MODE buttons simultaneously to
switch between °C and °F.