Operation; Operating Conditions; Control Elements; Setting The Temperature - Summit Classic Collection CL65ROS Manuel D'utilisation

Masquer les pouces Voir aussi pour CL65ROS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating conditions

Proper operation of the appliance
is guaranteed only if the following conditions
are met:
 The temperature in the room where the
appliance is located conforms to the
climate class stated on the appliance's
rating label.
 Maximum ambient relative humidity:
RH75%.
 The appliance must be placed at a
sufficient distance from heat sources ( e.g.,
ovens, central heating,direct
sunlight,etc.).
 The appliance must be located in such a
place that it is protected against the
effects of weather.
 Regular maintenance is performed
according to the instructions in this user's
manual.
 The ventilation openings in the cover of
the appliance must not be covered by
anything.
 Correct installation ( e.g., leveling,the
capacity of the system corresponds to the
specifications on the rating label of the
appliance).

Control elements

For Models :
CL65ROS/CL68ROS/CL63FDOS
1) "
" button
To turn the unit ON and OFF, press and hold
this button for approximately 3 seconds.

Operation

2) "
" button
Energy conservation button:Pressing this
button for 3 seconds will turn the energy
conservation mode on or off. In this mode, the
LED light and display will turn off, and the
C/F light will be on.
3) "
" indicator light
Shows that the compressor is in operation.
4) "°C/°F" indicator light
The temperature scale is changed by
pressing the C/F button.
5) "
" button
Used to increase(warm) the temperature in
steps of 1 F(or 1C).
6) "
" button
Used to decrease(cool) the temperature in
steps of 1 F(or 1C).
"° C/° F"
7)
Press this button to switch the indicator light
between C and F.
LED display
8)
Shows the temperature of the internal cabinet

Setting the temperature

Insert the power plug into a properly grounded
power socket.
Use the
temperature of the appliance. Each time the
/
will increase / decrease by 1F (or 1C).
CL65ROS&CL68ROS
You can set the temperature in the range of
36° F to 50° F (or 2° C to 10° C).
CL63FDOS
You can set the temperature in the range of 39° F
to 64° F (or 4° C to 18° C).
9
button
/
buttons to set the desired
buttons are pressed,the temperature
.

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Cl68rosCl63fdos

Table des Matières