Transporting And Unpacking - Summit Classic Collection CL65ROS Manuel D'utilisation

Masquer les pouces Voir aussi pour CL65ROS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

 If the appliance is transported in a
horizontal position, the oil from the
compressor may leak into the cooling
circuit.For this reason,allow the appliance
to rest in a vertical position for 12 hours
before turning it on, so that the oil flows
back into the compressor.
 Remove the external packaging, remove
the protective plastic film from the surface
of the appliance (if used) and clean the
external parts of the appliance with a
cleaner designed for this purpose. Do not
use steel wool or any coarse agents,
which could irreparably damage the
surface of the appliance. Carefully remove

Transporting and unpacking

all papers and adhesive tape from the
appliance, doors and other parts packed
in polystyrene. Remove documents and
accessories from inside the appliance.
 The packaging material is recyclable and
is marked with a recycling symbol. For
disposal, follow the local regulations.
Packaging materials (plastic bags,
polystyrene parts,etc.) present a possible
source of danger and must be kept out of
the reach of children.
 Carefully inspect the appliance. If you
discover any faults, stop the installation
and contact the vendor.
4

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Cl68rosCl63fdos

Table des Matières