Technical Data; Disposal - weinor BiLine Combio-868 MVLED Instructions De Montage Et D'installation

BiLine Combio-868 MVLED/ MLED
8

Technical data

Power supply
Frequency
Maximum power input of motor
Maximum power input of light
IP code
Permissible ambient temperature
Radio frequency
Radio protocol
Supply line
Awning motor input
Motor input for Valance Plus
(MVLED only)
Light connection
Awning switching method
Light switching mode
Compatibility
9

Disposal

Do not dispose of used or defective electrical or electronic devices in household waste. They must
be returned to the manufacturer or taken to a local collection point.
Item number 116692-0000
Version 2 15.11.2013
Instructions de montage et d'installation
230 V
50 HZ
250 W
Certified for Becker R30/17C PS(+), R40/17C PS(+),
50/11C PS(+)
32 W;
at least. 1 – max. 11 LEDs, weinor system; max. 680 mA
IP 54
20 to +80°C
868.3 MHz
WeiTronic/Elero/Griesser
AMP male connector, 2-pole with earthing cable and ring-
type terminal for 6 m cable with safety plug
AMP female connector, 4-pole
Blue – black – brown – green/yellow
AMP female connector, 4-pole
Blue – black – brown – green/yellow
Female push-on connector, 2.8 mm (red/black)
Awning runs on self-sustaining power until end position is
recognised;
coordinated operating mode with retraction protection (MVL
only)
Light on/off
Dimming of light
•
WeiTronic BiEasy hand transmitter
(bidirectional only)
•
WeiTronic Remoto hand transmitter (unidirectional only)
•
WeiTronic BiLine wall transmitter UniTec-868
•
WeiTronic BiLine Agido-868 product protection sensor
•
WeiTronic BiLine Sensero-868 AC Plus sun/ wind/ rain
sensor
•
WeiTronic BiLine Aero-868 AC 230 sun/ wind sensor
•
WeiTronic BiLine Aero-868 Solar sun/ wind sensor
•
WeiTronic BiLine Lumero-868 sun sensor
We reserve the right to make technical
changes
Page 13/28
Assembly and installation instructions