Accessory Storage - Waterpik 600 Serie Mode D'emploi

CLEANING AND TROUBLESHOOTING YOUR WATERPIK® WATER FLOSSER
ON
OFF
ON
OFF
Using Mouthwash and Other Solutions
Your Waterpik® Water Flosser can be used to deliver mouthwash and antibacterial
solutions. Afer using any special solution, rinse unit to prevent clogging by partially
flling reservoir with warm water and running unit with tip pointed into sink until
unit is empty.

Accessory Storage

Accessory tip storage for your two most frequently used tips is under the reservoir
lid and can be easily accessed by removing the reservoir.
Cleaning
Before cleaning, unplug from the electrical outlet. Clean the product when necessary
by using a sof cloth and mild non abrasive cleanser.
The water reservoir is removable for easy cleaning and is top rack dishwasher safe.
Removing Hard Water Deposits / General Cleaning
Hard water deposits may build up in your unit, depending on the mineral content
of your water. If lef unattended, it can hinder performance. Cleaning internal
parts: add 2 tablespoons of white vinegar to a full reservoir of warm water. Point
the handle and tip into sink. Turn unit ON and run until reservoir is empty. Rinse by
repeating with a full reservoir of clean warm water.
This process should be done every 1 to 3 months to ensure optimal performance.
Leakage
If leaking due to a damaged hose, replacement hoses and handles can be purchased
at www.waterpik.com or contact Water Pik Inc. customer service for a self service
repair kit.
9