Settings Menus; Navigating The Menus; Display - Arcam fmj BDP300 Manuel

settings
menus
The Settings menus allow you to configure all aspects
of your BDP300. The next few pages will go through
the menu items and explain their function. The Settings
menus may look daunting if you are new to setting up
home cinema, but the majority of them need only be
configured once when you first install the system.
The only way to view the Settings menus is on your
display device (TV or projector) using the on-screen
display (OSD) capability of the BDP300. To view the
OSD for the initial setting up, connect any of the video
outputs to your display device (or AV receiver connected
to your display).
Entering the settings menu
The icon is shown on screen when the BDP300
SETTINGS
is first switched on.
If the main menu is not currently displayed, press u
on the remote control to display it. Note that during the
playback of music, video or JPEG files, further button
presses may be required to exit the folder structure.
icon highlighted, press O to enter
With the
SETTINGS
the Settings menu.
Unstable OSD menu or picture display?
The default BDP300 output video resolution when first
powered up out of the box has been chosen according to
the national standard in the country of purchase.
If the output resolution and frame rate is at a setting
your display device does not support, the picture
may become unstable or may not display at all. If this
happens, connect the BDP300 directly to your display
using the composite video connection in order to see
the menus. Once the correct video settings have been
entered, a higher-quality connection can be used.

Navigating the menus

The BDP300 menus can be navigated by using the
cursor (up, down, left, right) keys on the remote control.
To display the main menu, press u .
1.
2. Use the B and C keys to navigate up and
down the main headings in the left-hand panel.
3. With the main section you require highlighted,
use the key to enter the middle column.
E
4. Use the and keys to navigate up and
B C
down the options in the middle column. Some
options may be greyed out because they are not
currently selectable (e.g. network IP address when
DHCP is used).
5. Pressing selects a setting: use the
E B
keys to change the setting.
Press O to confirm the setting. Go back to step 4
6.
to adjust any other settings in the current section.
Press < to return to the previous screen if you
7.
want to select another section.
E-19

Display

With the icon highlighted on your display,
SETTINGS
press O to show the 'Display' options.
Display 4 TV Aspect Ratio
Audio Resolution
Language TV System
Network HDMI Color Space
System HDMI Deep Color
Security HDMI 1080p 24Hz
Use cursor keys to highlight menu and
OK key to select
Press to move to the options in the second column.
E
3 4
Display TV Aspect Ratio
Audio Resolution
Language TV System
Network HDMI Color Space
System HDMI Deep Color
Security HDMI 1080p 24Hz
6
Use cursor keys to highlight menu and
OK key to select
TV Aspect Ratio – Set the aspect ratio (shape) of your
display. Press to move to the options in the third
E
column.
16:9 Normal: Use with widescreen TVs. 4:3
<
material is zoomed to fit the wide screen.
16:9 Full: Use with widescreen TVs. 4:3 material
<
is displayed in its original aspect ratio, with
vertical black bars at the sides.
4:3 Pan and Scan: Use with 4:3 non-widescreen
<
TVs. 16:9 widescreen content is displayed with the
left- and right-hand sides of the image cropped to
fit the screen (no black bars). The aspect ratio is
maintained (the image is not stretched).
4:3 Letterbox: Use with 4:3 non-widescreen TVs.
<
16:9 widescreen content is displayed with black
bars at the top and bottom.
and
C
16:9 Normal
1080p
PAL
Auto
Auto
Off
Exit
RTN SETUP
16:9 Normal
16:9 Full
4:3 Pan&Scan
4:3 Letterbox
Exit
RTN SETUP