Changing The Picture Mode; Changing Channels; Selecting The Last Channel; Displaying Program Information - HP SLC3760N Manuel De L'utilisateur

Changing the Picture
Mode
Pressing the Picture button displays the AV Mode
currently selected. Keep pressing the Picture button or
right arrow to change the video mode until you reach
a desired picture.
Standard: Good for normal viewing conditions
■
with normal room lighting.
Movie: Good for watching movies in a darkened
■
room.
Game: Good for playing games: lowers image
■
brightness for easier viewing.
User: Displays the custom settings you configure
■
in the OSD. For more information on defining the
picture settings, see "Using the Picture Menu" on
page 50.
Dynamic (fixed): Uses factory preset values for
■
image and sound settings. Allows no adjustments.
Dynamic: Enhances contrast and sharpness for a
■
clear image in a well-lit room, useful for viewing
sports.

Changing Channels

Press the Ch+ or Ch– buttons on the remote control to
change the channel up or down. The TV allows you to
select up to 135 channels (1 to 135). To select a
channel, enter a one-digit, two-digit, or three-digit
number, or use the channel up or down buttons.
To select a channel number (for example, channel 25):
Complete the following procedure within 4 seconds.
1
Press the 2 button on the remote control.
2
Press the 5 button.
3
Press Enter.
36
HP MediaSmart HDTV User's Guide
To select a subchannel number, such as 14–2,
complete the following procedure within 4 seconds:
1
Press the 1 button on the remote control.
2
Press the 4 button.
3
Press the – (dash) button.
4
Press the 2 button.
5
Press Enter.

Selecting the last channel

Press the Last Ch button on your remote control to view
the previous channel you were viewing.
Displaying Program
Information
Pressing the Info button displays a banner with
information about the current program you are
viewing.
Sometimes the name of the program is not
included in the broadcast. In that case, the
program name is not displayed.
Selecting the Input
Source
1
Pressing the Source button displays the input
source.
2
Press the Source button as needed to select the
desired input source.
n