Connecting Cable Or Satellite With A Set-Top Box - HP SLC3760N Manuel De L'utilisateur

Connecting cable or satellite
with a set-top box
Optional equipment and all cables are sold separately.
You can connect a digital TV set-top box (air or cable)
and other audiovisual equipment by using the
following:
Component video and audio cables connected to
■
the Input 1 or Input 2 connectors on the TV.
S-video and audio cables connected to the Input 3
■
connectors on the TV.
Video (composite) and audio cables connected to
■
the Input 1, 2, or 3 connectors on the TV.
HDMI cable connected to the Input 4 connector on
■
the TV.
DVI video cable with DVI-to-HDMI converter and
■
audio cables connected to the Input 4 (HDMI) and
audio connectors on the TV.
c
CAUTION: Unplug power from the wall for
the TV and all connected components
before connecting the set-top box.
1
Connect the set-top box input source cable(s) to
the back of the TV using one of the connector sets.
Component video and audio cables
■
connected to Input 1 or Input 2 connectors on
the TV.
S-video and audio cables connected to Input 3
■
connectors on the TV.
Video (composite) and audio cables
■
connected to Input 1, 2, or 3 connectors on
the TV.
HDMI cable connected to Input 4 connector on
■
the TV.
DVI video cable with DVI-to-HDMI converter
■
and audio cables connected to Input 4 (HDMI)
and audio connectors on the TV.
n
The Video (composite) connector in each of
the Inputs 1, 2, and 3 connector sets shares
audio connectors with the Component or
the S-video connector in the set. If cables
are connected to both video connectors in a
set, the Component or S-video connector
has priority over the Video connector.
2
Connect the cables to the set-top box.
3
Turn on the set-top box.
4
Connect power to the TV; see "Connecting power
to the TV" on page 18.
5
Turn on the TV; see "Turning the TV On and Off
(Standby)" on page 21.
6
Open the OSD and specify settings as needed;
see "Changing the TV Settings" on page 49.
MEDIASMART MEDIASMART
B B
11
Setting Up