How To Choose Mode; How To Know The Current Status - Hydro-Pro+ Premium 22M Manuel D'installation Et D'utilisation

4 USAGE AND OPERATION
Parameter 7
Can save setting after power
off or not 1 (yes) 0 (No)

4.3. How To Choose Mode

Cooling mode
 Press "MODE" to choose mode at first;
 Press " " to switch on the unit. the LED displays the water-in temperature;
 Please note that mode can also be changed when the unit is running.
Water temp. of inlet

4.4. How To Know The Current Status?

Evaporate temp.
Parameter 8
Mode: 0 (cooling only)
1 (cooling & heating)
2 (auxiliary elec. heating)
3(heating only)
Heating mode
Water temp. of outlet
Ambient temp.
10
Parameter 9
Pump: 0 (always open)
1 (10 seconds start
before compressors starting 30
seconds stop after
compressors stopping)
Auto mode
Condenser 1 temp.