Tips for Maintaining your Shower Panel Scale Removal
1. If scale deposits are noticed in the jet spray nozzles, turn
the water on using a low flow setting and lightly rub the
rubber nozzles with your finger or a non abrasive sponge
or clean cloth (see (a))
2. If scales or deposits are stubborn or difficult to remove,
especially is present on the chrome plated surface of the
shower head or jet sprayers, please follow these steps:
a. pour approx. 1 cup of commercial scale remover such
as "LIME AWAY™" or CLRTM into a shallow dish.
b. dilute the scale remover with water as instructed in the
scale remover instructions.
c. remove the shower head or jet sprayer affected and
soak it face down in the scale remover solution for 2-5
minutes or as recommended on scale remover instructions
(see (b)).
3.Thoroughly rinse the shower head or jet spray part with
warm water (see (c)).
4. Reinstall the shower head or jet spray part. Turn on the
shower and allow the part to be flushed for about 1 minute.
- 15 -
(a)
3/4"
(b)
(d)