Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Specifications
In-ear monitor IEM3 Prodipe
•
Earphone diameter: Ø 10mm
•
Impedance: 16Ω
•
Sensitivity: 92dB±3 dB
•
Frequency response: 10Hz at 22kHz
•
Cable length: environ 1.2 m
•
Connector type: Ø3.5mm stereo
IEM5120 (transmitter and bodypack):
•
Transmission type: UHF
•
UHF frequency range: 630MHz at 680 MHz
•
Number of channels: 100 channels
•
Dynamic: >90dB
•
THD: ＜0.1%
•
Frequency range: 30Hz～20KHz
•
Operating range: 80m (optimum conditions outside)
•
S/N ratio: ＞105dB
IEM5120 transmitter:
•
Output power: 10mW
•
Audio input: Combo XLR/Jack 6.35mm (x2)
•
Audio input: Jack 3.5mm (left+right)
•
Audio output : Jack 6.35mm (left+right)
•
Audio headphone output headphonet: Jack 6.35mm
•
Dimensions (W x H x D) : 220mm x 47mm x 186mm
•
Weight: 780g
Bodypack receiver:
•
Audio output: Jack 3.5mm (casque audio stéréo)
•
Battery: two AA batteries (not included)
•
Battery life: about 8 hours (optimum conditions outside)
•
Sensitivity: <-94dBm
•
Dimensions (L x W x P): 66mm x 108mm x 22mm
•
Weight: 80g (without battery)
Illustrations et photos non contractuelles
Actual product(s) may differ from illustrations/photographs used
Copyright © 2020 IPE Music/Prodipe
Page 22
Publicité
Table des Matières
