Kenwood ST510 Serie Mode D'emploi page 2

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
before using your Kenwood
Do not let children use or play with
appliance
the appliance.
Read these instructions carefully and
Only use the appliance for its
retain for future reference.
intended domestic use. Kenwood
Remove all packaging and any
will not accept any liability if the
labels.
appliance is subject to improper use,
Test-iron an old cloth to make sure
or failure to comply with these
the soleplate and water tank are
instructions.
clean.
before plugging in
Make sure your electricity supply is
safety
the same as the one shown on the
heel of your iron.
Never bend the cord guard when
wrapping the cord around the iron -
This iron complies with European
in time the cord will burn out.
Economic Community Directive
Don't get burnt by the iron's steam,
89/336/EEC.
hot water or soleplate.
know your Kenwood
Steam or hot water can come out of
the soleplate when you're not
iron
expecting it, such as when you raise
the iron from flat to upright. So make
variable steam/self clean control
sure no one's in the way.
shot of steam button
Keep children away from the iron.
spray button
And make sure they can't grab the
auto safe light (ST540 series only)
cord and pull the iron down.
temperature indicator light
Never iron clothes being worn.
temperature control
Never put the iron, cord or plug in
cord guard
liquid - you could get an electric
water fill inlet cover
shock.
heel
Never use a damaged iron. Get it
temperature aligning mark
checked or repaired: see 'service
jug
and customer care'.
using your iron
Never leave the iron on unattended.
Unplug:
filling with water
before filling with water or
● ●
1 Unplug.
emptying water out
2 Move the variable steam control to
● ●
before cleaning
● ●
straight after use
3 Hold the iron with its point facing
Only use the jug provided to fill the
downwards. Press the water fill inlet
tank, never put the iron under the
cover which will move inside the
tap to fill.
iron. Fill the tank with tap water
After filling with water, make sure the
using the jug provided
water fill cover is fully closed.
above the maximum level marked.
Always allow the iron to cool before
4 Press the cover again and it will
emptying any water from the tank.
return to its closed position.
During ironing pauses, never leave
If your tap water's hard, use filtered
the iron flat - it could burn what's
water - it'll increase the life of your
underneath. Leave it upright.
iron. (Kenwood water filters are
Do not let infirm people use the
widely available). Don't use distilled
appliance without supervision.
water.
2
. Never fill

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

St530 serieSt540 serie

Table des Matières