Operation
44
AUTOMIXING
In AUTOMIXING mode the automatic mixing functions (Page 34) can be switched on or off for
the input channels.
Turning the control clockwise switches the function on, and the LED ring lights up completely.
Turning the control counter-clockwise switches the function off, and only one LED lights up.
Figure 16: LED ring when switching a function off/on
Pressing the rotary control also switches the function on or off.
NOTE
DUCKING
In DUCKING mode it is determined which MIC/LINE or AUX input channel can attenuate the
other channels by 10 dB when it is active. This mode works independently of the enabled or
disabled automatic mixing functions.
This function can only be active on a single input channel. Enabling the DUCKING function on
another input channel causes the function to be disabled on the previous channel.
NOTE
Turning the control clockwise switches the function on, and the LED ring lights up completely.
Turning the control counter-clockwise switches the function off, and only one LED lights up.
Figure 17: LED ring when switching a function off/on
Pressing the rotary control also switches the function on or off.
NOTE
DMM 4/2/2