Operation
LIMITER
In LIMITER mode the limiting behaviour of the master output is changed.
Turning the "OUT MASTER" rotary control clockwise increases the threshold of the limiter.
Turning it counter-clockwise decreases the threshold.
Figure 15: Adjustment range for the LIMITER function
A low threshold setting (in this case: -28 dBFS and one illuminated LED) results in a very
powerful limitation, while the output level remains relatively small. A higher threshold setting
(in this case: 0 dBFS and a fully illuminated LED ring) means there is no limitation.
D D MM 4/2/2
43