Reporting - AKO PLATINUM PV-Monitor Instructions D'installation Et D'emploi

6.5

Reporting

 Select register Reporting.
Screen shows an evaluation graph of the recorded measured values
from the PV-Monitor database.
Fig. 4 Screen Reporting
The values of the individual inverters and of the plant total are shown
in different colours. The legend below the graph indicates the colour
attribution. Changing the colours see 6.7 Settings.
When the cursor points at a measuring point:
Î
The measuring value is indicated.
To change the scale and zero-point of the diagram axes:
 Position cursor on diagram.
 Left-click on diagram.
 Change scale and zero-point with the mouse wheel.
- or -
 Position cursor on diagram.
 Left-click on diagram and keep pressing mouse key.
 Select the display range by moving the mouse.
Installation and operating manual: PLATINUM PV-Monitor
Date 02/2009
Mat.-No. 717 553
PLATINUM PV-Monitor
Operation
Note
13