Important Safety Information - Olympia A296 Plus Mode D'emploi

Important Safety Information

Please observe the following information to ensure reliable operation of the
laminator:

Read this manual thoroughly and observe the instructions and
1
information in it when operating the device.
Keep the operating instruction manual available for future reference
2
Prevent damage to the power plug and power cable. Never twist the
3
power cable. Do not operate the device if the power cable or power
plug is damaged.
Do not use the device in the vicinity of hot surfaces or in damp
4
environments and protect it from direct sunlight and dusty conditions.
Disconnect the power plug before starting to clean the unit. Never use
5
any solvents or aggressive cleaning agents.
Metallic objects cannot be laminated.
6
7 Children must not be allowed in the vicinity of the equipment when it is
ready to operate.
8 Disconnect the power adapter plug when the device is not in use.
Always switch the unit off immediately if it emits a strong smell or it is
9
not in operation.
Do not touch the power adapter plug with moist hands.
10
Ensure that the On/Off switch is switched off before connecting the lami-
11
nator to the mains power supply.
Only insert foil pockets which comply with the specifications in the de-
12
vice; refer to Section "Features". Using foil pockets which are too
large could lead to the unit jamming.
Do not laminate heat sensitive materials, such as thermal paper, in
13
the device.
Lamination of moist documents produces poor results.
14
Do not use foil pockets intended for cold lamination for hot lamination.
15
This could damage the machine, foil pockets and document.
16 Do not cut foil pockets to size. The resulting cut edges could cause
the lamination foil to jam.
Keep loose clothing, ties, jewellery, long hair and other loose
17
objects away from the insertion slot. Risk of injury!
18 The device may only be used in dry, indoor rooms.
12
.