ResMed S9 Serie Information De Produit page 8

H5i technical specifications
Temperature
Maximum heater plate temperature: 150°F (65°C)
Temperature cut-out: 165°F (74°C)
Maximum gas temperature: ≤ 106°F (≤ 41°C)
Physical
Dimensions (L x W x H): 6.0" x 5.7" x 3.4" (153 mm x 145 mm x 86 mm)
Weight (water tub): Docking station and unfilled water tub 1.5 lb (670 g)
Weight (cleanable water tub): Docking station and unfilled water tub 1.7 lb
(770 g)
Water capacity: To maximum fill line 380 mL
Materials
Docking station: Flame retardant engineering thermoplastic, aluminium
Cleanable water tub: Injection molded plastic, stainless steel and silicone seal
Water tub: Injection molded plastic, aluminium and thermoplastic elastomer
Air tubing technical specifications
Maximum Air tubing
recommended
pressure
20 cm H O ClimateLine heated air
2
tubing
SlimLine air tubing
25 cm H O Standard air tubing
2
3m air tubing
Heated tubing temperature cut-out: ≤ 106°F (≤ 41°C).
Notes:
•
The manufacturer reserves the right to change these specifications without notice.
•
The temperature and relative humidity settings displayed for ClimateLine are not measured
values.
•
Check with your clinician/service provider before using the SlimLine air tubing with devices other
than the S9 or H5i.
8
Material
Flexible plastic and
electrical
components
Flexible plastic
Flexible plastic
Flexible plastic
Length Inner diameter
6'6" (2 m) 0.6" (15 mm)
6' (1.8 m) 0.6" (15 mm)
6'6" (2 m) 0.75" (19 mm)
9'10" (3 m) 0.6" (15 mm)