Samsung NX58K7850S Serie Manuel D'utilisation page 40

Maintenance
To apply the graphite lubricant
NOTE
• Do not use a dishwasher to clean the racks.
• If a rack does not slide in and out smoothly, apply a few drops of cooking oil
to the oven rack guides.
• If a rack becomes too difficult to slide in or out, lubricate the rack.
• To purchase the graphite lubricant, contact us at 1-800-SAMSUNG (726-7864).
• For online shopping, visit http://www.samsungparts.com/Default.aspx and
search for part DG81-01629A.
40 English
NX58K7850SS_AA_AC_DG68-00787A-00_EN.indd 40
1. Shake the graphite lubricant before
opening it.
2. Apply 4 drops of lubricant to the
inner side of the left sliding track, and
4 drops to the outer side of the left
sliding track.
Repeat step 2 above on the right sliding
3.
track.
4. Extend and collapse the gliding rack
several times to distribute the lubricant.
CAUTION
• Do not leave racks in the oven during the self-cleaning cycle. The extreme
heat generated in this cycle can permanently peel off the rack coating and
make it difficult to remove the rack.
• Do not spray cooking oil or lubricant directly onto the gliding rack.
Door
Do not remove the inner gasket of the oven door for cleaning.
Inner side
• Inner surface: Clean the inner side of the door manually using a soapy plastic
scouring pad, and then wipe with a dry cloth. Take care not to get the gasket
wet or allow moisture into the door.
• Inner glass: The inner glass is cleaned automatically during the self-cleaning
cycle.
Outer side
• Outer surface: Follow the cleaning instructions for the stainless steel surface in
the previous section.
• Outer glass: Clean the outer glass using a glass cleanser or soapy water. Rinse
and dry thoroughly. Take care not to get the gasket wet or allow moisture into
the door.
•
*
•
CAUTION
Do not let moisture enter the door or
contact the door gasket (*). Moisture
may reduce the gasket's performance.
Do not let moisture or water enter the
burners, electrical controls, or switches.
1/11/2016 7:03:45 PM