Trevi IP 365 Manuel page 26

You can also set a User interface main much easier and faster in the selections.
How to change the graphical interface to the main screen:
• Select the "Settings".
• Select "Other" and then "More Settings".
• Select "Home" and put the blue dot is present on the left box, the item "MediaBox launcher".
• Select the icon
• The user interface will change as in the following image:
CONNECTION TO NETWORKS
Wireless & networks
To access the Internet, first of all, you must configure a network that can use a Wi-Fi Ac-
cess Point (AP) or a wired cable via LAN socket. Choosing it accesses settings Wireless
and Ethernet.
Connection via LAN socket:
• Connect the LAN cable coming from your modem router, the LAN socket (4) unit.
• Select the "Setting".
• Select Ethernet, you will see a check mark on the box to the left (LAN connection is
enabled). After connecting, you will see the address IP network and you can naviagre
make any further settings.
Search and connect to a Wi-Fi network:
To make a connection of this type must be in a Wi-Fi zone.
• Select "Setting".
on the status bar.
26
IP 365