Product Overview - Gens Ace ImarsIII Pro Notice

Connect the charger to the power supply. The IMARS III LOGO will display for
about 2 seconds before entering Charger mode.
The top level menu is divided into 3 functions. By pressing +/- buttons, the
user may select between charge mode, battery check mode, and system
setting mode.
1. Operating mode settings
The charger supports 4 different battery chemistries: LiPo, LiHV, LiFe and NiMH
The charger supports 4 different modes:
CHARGE=Balance Charge
STORAGE= Storage
Remarks:
The balance charge mode is a synchronized charging and balancing process. In this mode,
a battery will be balanced and charged to a preset cutoff voltage.
The Cell Balancing mode of this charger is used to equalize voltage difference of a multiple
cell battery. In this mode, if the voltage is lower than 4.05V per cell of a LiPo battery, or 3.35V
of a LiFe battery, the charger will balance the cell voltage and charge the battery to
4.05V(Lipo) and 3.35V(LiFe). Otherwise, If the voltage is over than 4.05V per cell of a LiPo
battery, or 3.35V of a LiFe battery,the charger will enter balance the cells only without
charging to be full.

PRODUCT OVERVIEW

①
②
③
④
⑤
⑥-⑨
INSTRUCTION
Menu Descripition:
(1) Memory selection (2) Battery chemistry selection
(3) Operating mode selection
(5) Battery Voltage/cell count selection.
Menu Descripition:
(1) Battery pack voltage, (2) Single cell voltage readings
for pack, (3)Battery pack voltage and highest/lowest cell
voltage in pack
Menu Descripition:
(1) Safety timer setting (2)Version Information (3)Test
mode (4)Sound setting (5) Cutoff capacity
CellBAL = Cell balancing
DISCHG = Discharge
AC Input
Display
Balance port
USB output port/firmware upgrade port
Battery Output
button
(4) Amperage setting
Gens Ace ImarsIII
15