Battery Replacement - J BIMBI Kitty Manuel D'utilisation

it on damp or wet surfaces. Open the device
only to replace the battery as described in
this manual. Keep the device away from
children or disabled people during this
operation.

Battery replacement

- Unscrew the 3 screws on the back of the device
(Fig. 2/A).
- Paying attention not to damage the electronics
inside the device, remove the battery by sliding it
under the metal bridge (fig. 2/B).
- Insert the new battery paying attention when
inserting the charging poles, the positive pole
must be facing outwards (fig. 2/C).
- Close the device screwing the 3 screws on the
back (fig. 2/D).
25