J BIMBI Kitty Manuel D'utilisation page 22

two sonic intensities (low and high) and one
ultrasonic intensity.
- The device always turns on in low sonic mode;
to switch from one intensity to the other,
simply press the MULTIFUNCTION button. When
switching from mode to mode, the number of
flashes indicates the intensity of the emissions:
1 flash = low sonic intensity, 2 flashes = high sonic
intensity, 5 quick flashes = ultrasonic mode.
- It is recommended to use low sonic or ultrasonic
intensity indoors and high sonic intensity
outdoors. Ultrasonic mode is less effective and
has a shorter range than sonic mode, but has the
advantage of not being audible by the human
ear.
- To turn off the device, press and hold the
MULTIFUNCTION button for about 2 seconds.
Shutdown is indicated by 1 long flash.
22