Product Information; Declaration Of Conformity - Hilti SL 2-A12 Mode D'emploi Original

These numbers refer to the corresponding illustrations found at the
beginning of these operating instructions
The numbering reflects the sequence of operations shown in the
illustrations and may deviate from the steps described in the text
Item reference numbers are used in the overview illustrations and
refer to the numbers used in the product overview section
This symbol is intended to draw special attention to certain points
when handling the product.

1.3 Product information

products are designed for professional users and only trained,
authorized personnel are permitted to operate, service and maintain the
products. This personnel must be specifically informed about the possible
hazards. The product and its ancillary equipment can present hazards if
used incorrectly by untrained personnel or if used not in accordance with
the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to
state the product details when contacting Hilti Service or your local Hilti
organization to inquire about the product.
Product information
Cordless lamp
Generation
Serial no.

1.4 Declaration of conformity

We declare, on our sole responsibility, that the product described here
complies with the applicable directives and standards.
declaration of conformity can be found at the end of this documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916
Kaufering, Germany
2 Safety
2.1 Important safety instructions
WARNING! READ ALL INSTRUCTIONS. Failure to follow all instructions
listed below can result in electric shock, fire and/or serious injury. KEEP
THESE INSTRUCTIONS IN A HANDY YET SECURE PLACE.
2.2 Careful handling and use
▶ Use the product only when it is in perfect working order.
*2171355*
SL2-A12 | SL2-A22
01
2171355
A copy of the
English 11