Team kalorik TKG VT 1043 RD Mode D'emploi page 6

ASSEMBLY
• Loosen guard mounting ring (3) from the motor housing.
• Firmly position the rear guard (4) and fasten the guard mounting ring (3).
• Push the blade (2) on the motor shaft (5).
• Hang the front guard (1) to rear guard (4) with the provided clips.
• Secure with the screws provided.
OPERATION
• This appliance is equipped with 3 ventilation speeds. To switch on the appliance, press
one of the speed knobs. To switch it off, press "0".
Speed settings:
0 = OFF
1 = Medium
2 = High
• This appliance also has an oscillation function:
− Push the oscillation knob (7) to switch on the oscillation.
− Pull the oscillation knob (7) to stop.
• It is also possible to tilt the upper part in order to adjust the airflow vertically.
CLEANING AND CARE
• Always disconnect the power supply cable from the power supply before carrying out
any cleaning operation.
• To remove dirt from the plastic surfaces, use a soft damp cloth. Use a vacuum cleaner
to remove the dust from the guards without having to disassemble them.
• Never immerse the fan in water or any other liquid.
TKG VT 1043 RD 6