Bimar YDZ-10D/3 Notice D'instructions page 39

 The appliance must be placed on a stable surface that is wide (do not place on a
shelf), not on an incline (the water may overflow and escape), or in a place where it
might be knocked.
 The appliance must not be placed just below a power socket.
 The power socket must be easily accessible so that the plug can be removed easily
in an emergency.
 Make sure that the mains cable is correctly positioned and is not in contact with hot
parts or sharp edges, or wound around the appliance or twisted and does not
become entangled, to prevent the appliance from falling.
 If tank drainage is in use, check that the continuous drainage spout is tightly sealed
with its rubber cap each time the appliance is turned on.
 If continuous drainage is on, make sure that the drainage tube is properly
connected to the spout, that the opposite end is lower than the spout, and that the
incline is even, so that the water flows internally without any obstructions.
 Caution: do not cover the appliance to avoid overheating.
 The appliance does not require installation, i.e. preparation of electrical
attachments/water connection /fixtures or other installations, before use.
 Before each use, check that the appliance is in good condition and ensure that the
power cable is not damaged.
DESCRIPTION
The appliance is equipped with the following parts and elements for control and
regulation: (1), Removable tank (2), Handle for transportation (3), Air outlet grille (4),
Filter (5), Continuous drainage spout (6) and rubber cap (7), Cord winding fixtures (8),
Continuous drainage tube (only supplied with certain models).
Each component has the following functions:
Control Panel
Depicted below: it has push buttons that activate the functions, LED lights and display
to view functions and data.