poolstar Z-RAY DRIFT Manuel D'instructions page 13

1. After use, please clean your inflatable kayak to prevent it from being
damaged by sand, salt water or sunlight.
2. Clean the inflatable kayak with a soft detergent and water.
3. Do not use solvents such as gasoline as they can corrode the surface
materials or plastic parts of the kayak.
4. Make sure that the hull is completely cleaned and dry before storing
otherwise it may develop mold.
5. Once deflated, fold the kayak, place in the backpack and store in a dry,
ventilated place above 15°C.
Small holes or punctures can be repaired with the repair kit that is provided
!
in conjunction with the kayak.
1. Do not inflate the kayak
2. Wipe the hull with soap and water to find holes in the kayak. The soap will
bubble over the hole.
3. Clean the area around the hole with water or alcohol.
4. Use a pencil to sketch out the outline of the patch.
5. Cut a patch of a suitable size.
6. Apply glue evenly to the damaged area and patch and then press and
hold the patch to the damaged area.
7. Leave the kayak for at least 24 hours or more before inflating it.
If the valve is damaged, please follow the below instructions for replacing it.
5
Maintenance
Repair
IMPORTANT
Do not return the product to the store
Contact your local after sales service
on www.poolstar.fr
Valve Replacement
www.zraysports.com
13
PK6-20-GB