Cleaning And Care; Technical Data - Polarlite Elite 1499883 Mode D'emploi

Hanging/Setting up
Use the hook to hang the product only.
• The product can be hung up
using the hook. Fold open
the hook (see illustration at
right). Hook the smaller side
of the hook under the
handle (1) and hang the
larger side of the hook on a
tent pole, etc. Both ends of
the hook rotate 360°.
• To set up the product, place
it on a horizontal, stable
surface.
Operation
• Push the on/off button (3). The neutral white light turns on. The battery indicator lights up for
a few seconds to show the battery charge state.
• Repeatedly and quickly press the on/off switch (within 2 seconds) to switch between the
product's modes: Light mode 1 (neutral white) > light mode 2 (cold white) > light mode 3
(warm white) > flickering mode
• Turn the light controller (3) clockwise to increase
brightness and counterclockwise to dim (see
illustration at right).
• Wait for longer than 2 seconds and press the on/
off button again. The light goes out.
• Turn the lamp shade (2) counter clockwise to
remove it for a wider beam.

Cleaning and care

• Never submerge the product in water.
• Remove the batteries before cleaning.
• Under no circumstances use aggressive cleanings agents, cleaning alcohol or other chemical
solutions since these can penetrate the housing or impair functionality.
• Use a dry, soft cloth for cleaning the product.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines.
Remove any inserted batteries and dispose of them separately from the product.
b) Batteries
You as the end user are required by law (Battery Ordinance) to return all used
batteries. Disposing of them in the household waste is prohibited.
Contaminated batteries are labeled with this symbol to indicate that disposal in the
domestic waste is forbidden. The designations for the heavy metals involved are: Cd
= Cadmium, Hg = Mercury, Pb = Lead (name on batteries, e.g. below the trash icon
on the left).
Used batteries can be returned to collection points in your municipality, our stores or wherever
batteries are sold.
You thus fulfill your statutory obligations and contribute to the protection of the environment.

Technical data

Power supply ................................ 4 x 1.5 V batteries, type Mono (D), LR20
Power consumption ...................... max. 11.5 W
Operating time .............................. light mode 1 (neutral white)
light mode 2 (cold white)
light mode 3 (warm white)
flickering mode
Illuminants .................................... total 24 (non-replaceable):
12 x cold white LEDs, 12 x warm white LEDs
Luminous flux ............................... light mode 1 (neutral white)
light mode 2 (cold white)
light mode 3 (warm white)
Beam angle .................................. 360 º
Protection type .............................. IPx4
Operating/storage conditions ........ -10 to +40 °C, 30 - 85 % relative humidity
Dimensions (ø x H) ....................... 13 x 25 cm
Weight .......................................... 720 g
5.5 - 250 hours
11 - 300 hours
11 - 300 hours
30 hours
100 - 1000 lm
80 - 540 lm
60 - 400 lm
Distributed by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require
the prior written approval by the editor. Reprinting, also in part, is prohibited. The operating instructions reflect the current
technical specifications at time of print.
© Copyright 2016 by CEI Conrad Electronic International (HK) Limited *1499883_V1_1216_02_LS_m_en