Samsung NX58M6650W Serie Manuel D'installation page 25

Step 7. Assemble the surface burners
Model NX58M6630S*
Model NX58M6650W*
Precise Simmer Burner (RR)
Flat surface
Concave line
NX5000M_NX58M6650WS_AA_DG68-00992A-01_EN+MES+CFR.indb 25
CAUTION
Do not operate the surface burners without
all burner parts in place.
1. Position surface burner heads on top of
the surface burner manifolds as shown
at right. The electrodes will fit into the
slot in the bottom of the heads. Make
sure the surface burner heads are flat
and parallel with the cooktop.
2. Place the matching size caps on top of
each surface burner head.
NOTE
The caps on Precise simmer burner
(RR) and inside Dual Burner (RF) can be
interchangeably used.
3. Place the left, center, and right surface
burner grates on the cooktop. The
edges of the grates should match up
with the edges of the cooktop.
NOTE
• Grates should be placed on its
own position because they are not
interchangeable.
• You can recognize the right position of
grate by checking the bottom side of
each grate. Under the right, center, and
left grate, "RIGHT BACK", "BACK", and
"LEFT BACK" are engraved each.
• The grates are heavy. Be careful while
handling the grates.
English 25
2017-08-16 2:38:35