Sunny Health & Fitness SF-T7515 Mode D'emploi page 15

IMPORTANT NOTE:
You will need to lubricate your treadmill before the first use!
RUNNING BELTS & TREADMILL LUBRICANT:
Lubricating the Running Belt (No. 50) and Running Board (No. 49) is essential as the friction affects
the life span and operations of the treadmill. Inspect the Running Belt (No. 50) regularly. If you find
any wear on the Running Board (No. 49), please contact us at support@sunnyhealthfitness.com
WARNING: Always unplug the treadmill from the electrical outlet before cleaning, lubricating, or
repairing the unit.
HOW TO LUBRICATE:
Raise the Running Belt (No. 50) up on one side and apply lubricant to the Running Board (No. 49).
Use a rag to thoroughly wipe the lubricant over the Running Board (No. 49). Repeat this process for
the other side.
Light user (less than 3 hours/ week)
Medium user (3-5 hours/ week)
Heavy user (more than 5 hours/ week)
NOTE:
To better maintain the treadmill and prolong its life, it is suggested that the treadmill be powered off
for 10 minutes every 2 hours and fully powered off whenever not in use.
DO NOT LOOSEN OR MAKE ANY ADJUSTMENTS TO THE RUNNING BELT WHILE APPLYING
LUBRICANT. A loose Running Belt (No. 50) will result in the runner sliding off when in use, while
too tight of a Running Belt (No. 50) will decrease to the motors performance and also create more
friction between the roller and Running Belt (No. 50). The most suitable tightness for the Running
Belt (No. 50) is pulled out 50-75 mm from the Running Board (No. 49).
LUBRICATING THE TREADMILL
The following timetable is recommended:
every 2 months
every 45 days
every month
14
.