Telefunken TECHCLIM9 Mode D'emploi page 45

X
X
X
X
X
X
X
Fan speed button. Select different speed each time you press on it, the
corresponding light indicator will turn on :
Slow speed
LOW
Medium speed
MID
High speed
HIGH
Auto speed.
Only for the cooling mode.
Louvers auto swcing mode:
* on the control panel, press the button to allow the louvers to switch
automatically. Press the button again until the louvers stop at the desired
angle.
* on the remote control, according to the desired oscillation, press the
horizontal oscillation button or the vertical oscillation button.
Button to auto select the high speed fan.
The display shows the temperature in ° C by default. Press this button to
display the temperature in ° F. Press this button again to return to the ° C
display.
This button turns off the illumination of the LCD screen while you sleep.
Press this button to display the room temperature on the remote control;
press this button again to display the set temperature.
Press button to enter power saving mode. This mode works for 8 hours.
Note: This mode turns off when you switch modes or when the remote
control is turned off.
When the device is on, press this button to activate the "Health" function,
which will release negative ions. Press again to exit this function.
When the unit is off, press this button to activate the "iClean" function.
The screen of the remote control displays CL.
The unit automatically cleans the accumulated dust in the evaporator for
30 minutes. This function is disabled if you press this button again or the
remote control is off.
This button activates the internal drying function of the evaporator of the
device. When the unit is off, press this button, the unit will operate for 3
minutes at low fan speed. It is not recommended to turn the unit on or to
stop this function while it is being turned on.
7
ENGLISH