ICON IC1200 Manuel D'utilisation page 25

1L, 2L... : Indicates the power level of the heater.
1H, 2H, 3H,...9H : Timer display of the heater
(May be programmed up to 9 hours. )
ER1: Overheating
Operating the Appliance Without Remote Control
Function Key : Controls the temperature level setting and the
timer setting of the heater. Temperature level shall be increased
one level for each press on the key. Keep this key pressed for 6
seconds to perform a timer setting. Select the desired time zone
from the menu displayed on the screen. Product Standby
:
This indicates that the appliance is ready for operation.
Cleaning and Maintenance
Regular and careful maintenance of the appliance in line with
the recommendations provided in this manual is very important
to ensure efficient operation of the appliance for a long period of
time.
1. The soiling condition of the reflector (reflective mirror) and the
carbon filament shall be inspected at least once a month by the
user. Follow the cleaning and maintenance instructions if they are
soiled.
2. Depending on the amount of dust in the usage environment,
the said checks should be done more frequently.
3. Inspect the power cord and the plug while cleaning the
appliance. If there is damage on power cord or the plug, it should
be taken to authorized service.
4. While cleaning the appliance; the reflector, wire and body
should be visually inspected. If there is deformation, authorized
service should be called for the necessary actions.
5. It is recommended to replace the reflector every two years
for more efficient operation of the appliance. Reflector must be
replaced by authorized service. A clean reflector shall ensure
maximum level of heating efficiency.
25