ICON IC1200 Manuel D'utilisation page 19

the fuse only, always turn off by using the heater element function
switch.
- As there is a risk of fire when the heater is covered or positioned
incorrectly, do not use this heater with a separate system or any
other mechanism that automatically switches on the heater with a
scheduler, timer or remote control.
- Heat protector of this heater is intended to prevent direct access
to the heating elements and it shall be installed when the heater
is operated.
- Do not use your appliance for purposes other than its intended
purpose. (do not use it to dry clothes or keep animals or plants
warm).
- Do not attempt to clean the appliance with solvents or
flammable fluids. (This may cause electric shock or a fire)
- Do not use the heater while sleeping or while you are away
from the appliance.
- Do not use an extension cord, it may cause fire due to
overheating. If you shall use an extension cord, the cross-section
of the cord shall be at least 2 mm2 (14AWG).
- Your appliance shall be placed on a flat and level surface while
it is operated. Do not use on uneven or unstable surfaces.
- Do not attempt to disassemble or repair the device yourself.
- Do not jerk the heater.
- A light smoke or smell may occur during the first operation of
the appliance.
This is normal. Do not touch your appliance while on or right after
you turn it off.
19