Doro AFTI 30 Manuel D'utilisation page 7

English
Other
Message Waiting Indicator
Some PBX systems have a function called Message Waiting.
On the under side of the telephone is a switch marked (MW), this is used to
select one of the following options: LED+, LED-, Visual Ring Indicator ( )
and high voltage (HV).
By selecting the appropriate option for your system the telephone will indicate if
there are any voice mail messages available.
This function operates differently depending on the PBX system in question
therefore please contact your system administrator for more information.
If the unit is not connected through a PBX please select ring indication ( ).
Recall Button Timing (Australia only)
There are two different Recall Button Timings available: 100/600 ms.
Troubleshooting
Check that the telephone cord is undamaged and properly plugged in.
Disconnect any additional equipment that may be connected.
If the problem is resolved the fault is with the other equipment.
Test the equipment on a known working line, if the product works then the
fault is with the line.
If the telephone does not ring - check the ringer selection switch is
set to high or low.
If you are still experiencing difficulties, contact the Technical helpline.
Guarantee
This product is guaranteed for a period of 12 months from the date of purchase.
Proof of purchase is required for any service or support during the guarantee
period.
This guarantee shall not apply to a fault caused by an accident or any similar
incident or damage, liquid ingress, negligence, abnormal usage or any other
circumstances on the purchaser's part. Furthermore, this guarantee shall not
apply to a fault caused by a thunderstorm or any other voltage fluctuations.
This guarantee does not in any way affect your statutory rights. (As a matter of
precaution, we recommend disconnecting the telephone during a thunderstorm.)
www.doro.com 7