Doro AFTI 30 Manuel D'utilisation page 6

English
Memory
The telephone will store 13 numbers into memory (3 one-touch memories and
10 two-touch memories).
When a number is stored in memory, you need only press one or two buttons
dependant on location to make a call. One-touch memories are numbered
M1-M3, two-touch memories are stored using the telephone keypad digits 0-9.
Storing One-touch Memories
1. Lift the handset and press
2. Enter the phone number to be stored (up to 24 digits).
3. Press again.
P
4. Select a location M1-M3 by pressing the corresponding button.
5. Replace the handset. The number is now stored.
Dialling using One-touch Memories
1. Lift the handset (or press the
2. Dial the desired number by pressing the corresponding memory location
(M1-M3).
Storing Two-touch Memories
1. Lift the handset and press
2. Enter the phone number to be stored (up to 24 digits).
3. Press again.
P
4. Select a memory location by pressing one of the keypad numbers
5. Replace the handset. The number is now stored.
Dialling using Two-touch Memories
1. Lift the handset (or press the
2. Press
m
3. Select the memory location where the number is stored by pressing the
relevant keypad number
Press . If you want a pause in the telephone number.
r
If a stored number changes, enter the new number in the location of the old one following
the procedures above. Enter the name or number stored in memory on the memo list. Use a
thin instrument to take the memo list out of its holder, and to put it back in. The holder
cannot be opened.
6
Settings
P
s
P
s
.
-
0 9
(ignore anything you hear in the earpiece).
button) and wait for a dialling tone.
(ignore anything you hear in the earpiece).
button) and wait for a dialling tone.
.
- .
0 9
www.doro.com