Combustion air slide valve
Operating lever for combustion air supply
● Operating lever on „0":
all slide valves closed
● Operating lever on „I":
Secondary air slide valve completely open /
Primary air slide valve completely closed
● Operating lever on „II":
Secondary air slide valve completely open /
Primary air slide valve completely open
Regulation of combustion air
Position of operating lever:
„II" ..... Ignition position, max. heat output
„I" ....... Nominal heat output with billet wood
„I" ....... Nominal heat output with wood briquettes
„0" ..... Obtain glow
● As the secondary air also contributes to the cleanliness
of the glass pane, the operating lever should be set on
"I" minimum. This also applies in the event of low-load
operation.
● When not operating the lever should be set on "0", to re-
duce the cooling down of the room.
Fire grate
● With the help of the operating lever the fire grate can
be opened or closed to move the ash from the combus-
tion chamber to the ash pan by pushing the fire grate
back and forth.
● Primary air can only enter the combustion chamber if
the fire grate is set on open position.
Wood storage compartment
The wood storage compartment below the combustion
chamber is fitted with a magnetic pressure closure. It can
be opened by lightly pressing on the button (Olsberg
logo). Likewise it can be closed by lightly pressing.
Operating lever for the fire grate
press here
17