Electrical Connection; Maintenance; Disposal; Technical Data - Harvia Y05-0691 Instructions De Montage

Instructions for installation
● For a glass door, use the door magnet holder 3.
Depending on the distance to the door sensor, the following installations
are possible:
► The magnet is placed inside the holder (Fig. D). Fix the magnet by bending
the retaining tabs into the recesses with a screwdriver.
► Alternatively, screw the magnet onto the outside of the door magnet
holder (Fig. E).

5. Electrical connection

Observe the installation instructions for the used sauna control unit

6. Maintenance

The device is maintenance-free.

7. Disposal

● Please dispose of packaging materials in accordance with
the applicable disposal regulations.
● Used units contain reusable materials as well as hazardous sub-
stances. Therefore, do not dispose of your used unit with household
waste, but rather do so in accordance with the locally applicable
regulations.

8. Technical data

Door sensor
Dimensions:
Connection cable:
Magnet
Dimensions:
Magnetholder
Dimensions:
Glasdimensions:
80 x 20 x 15 mm
2 m - 2 x 0.5 mm², silicone
80 x 20 x 15 mm
80 x 22 x 30 mm
8 mm and 10 mm
p. 6/6