Mounting The Door Sensor; Mounting The Magnet - Harvia Y05-0691 Instructions De Montage

Instructions for installation

4.1. Mounting the door sensor

Fasten the door sensor 1 outside the cabin near the sauna door:
Observe the minimum distance of 10 cm from the door hinge.
● For a wooden sauna cabin:
► Use the wood screws supplied (Fig. A).
● For a glass surface:
► Use the double-sided adhesive tape (Fig. B). Cut the adhesive tape
provided into two equally sized pieces and stick the pieces to the back
of the door sensor as shown in Fig. B.
Fig. A

4.2. Mounting the magnet

Fasten the magnet 3 to the sauna door so that it is flush with the sensor.
Make sure the distance to the door sensor is correct to ensure that it
works properly.
● On a wooden door:
► Use the wood screws supplied (Fig. C).
Fig. C
Fig. B
Fig. D Fig. D
p. 5/6
Fig. E
EN