On A Phone With A Handset Lifter Or Ehs; Conference Calling With Multiple Headsets - Spracht ZuM Maestro DECT Mode D'emploi

Answer a call:
1. Lift the headset from the docking cradle or press the
Multi-Function button.
2. Press the headset button on the desk phone.

On a Phone With a Handset Lifter or EHS

Make a call:
1. Lift the headset from the docking cradle, or press the
Multi-Function button.
2. Dial numbers through the desk phone keypad.
Answer a call:
Lift the headset from the docking cradle or press the
Multi-Function button.
End a call:
Dock the headset, or press the Multi-Function button.
Pairing the Headset to the Base; Unpairing
Pairing
Press the PAGE (item 8 on page iii) switch for 5s. The
Audio Link Indicator
to indicate it's searching for the headset. Next, press the
headset Mute button until the Headset Status LED flashes:
the Headset will be in pairing mode. The pairing will be
successful when the Audio Link Indicator and Headset
Status LED turn off at the same time.
Unpairing
Unplug the Base's power adapter. Press and hold the
Mic Volume Up + at the back of the Base while plugging
the power adapter back in. When the battery charging
status light flashes 3 times, the Headset and the Base
are unpaired. The Base will then enter search mode
automatically and the Audio Indicator

Conference Calling with Multiple Headsets

The Zum Maestro DECT™ is able to pair with a total of
four Headsets for conferencing: one Master and three
Secondary Headsets.
ZūM Maestro DECT™
on the front of the Base will flash
will be on.
4