NEC AccuSync 500 Manuel D'utilisation page 16

Controls
–continued
Return to all factory default settings except
RESET
"LANGUAGE": Brightness, Contrast, Tilt,
Color 9300K, Video Level, OSD Time,
Moire (These reset options may differ
depending on the mode selected: Preset,
User, or New).
If you don't want to reset the monitor, use
the
then press the SELECT (or SET) button.
This item allows you to reduce the degree
MOIRE
of moire. (Moire is caused by interference
Horizontal Scan Line with the periodical
dot screen). It is normally OFF (H:0/V:0).
The moire adjustments may affect the
focus of the screen.
Moire adjustments may shake slightly
while the moire reduction function is on.
AS500700700M900FINAL2.p65
button to select CANCEL and
14
14 11/11/03, 1:45 PM