Vaporesso Target MINI II Mode D'emploi page 4

different values within proper range, below show the recommend range of the heating material :
• BP (Bypass mode): Direct output voltage mode depends on battery level, supported coil resistance range: 0.05-5ohm.
• SET: System setting ,including DEFAULT/TIME SET/BRIGHTNESS/ PUFF COUNTER/SMART ON OFF/ AUTO ON. OFF/
SCREEN/ VERSION.
• SMART ON/OFF: It is a advanced Variable Wattage mode, when smart function is enable, it can change intensity
according to the coils resistance levels within a safe limit in VW-H/N/S mode.
• AUTO ON/OFF: The Auto function taking away any operation difficulties switching between VW-H and VW-N or
between VT-H and VT-N.
4 English
CAUTIONS:
• Please turn off the device when it is not in use.
• Do not leave the charging device unattended.
• Do not drop, throw or abuse your device, it may cause damage.
• Please use a standard USB output charger in proper charging Current and Voltage range.
• Keep away from water or any flammable gas, liquid .
• Do not exposure to direct sunlight, dust, moisture or mechanical shock.
• Do not exposure the device to extreme temperature. (Applicable temperature range: -10~60 ℃ /14~140 ℉ while
using, 0~+55℃ /32-131 ℉ while charging, -10~45℃ /14~113 ℉ while storing).
• EEE Recycling: the product should not be treated as household waste, instead it should be handed over to the
applicable collection point for the recycling of electrical and electronic equipment.
• Battery Recycling: the product battery should not be treated as household waste, instead it should be handed over
to the applicable used battery collection point for recycling.
• Only have your device repaired by Vaporesso. Do not attempt to repair it by yourself as damage or personal injury
may occur.
English 5