Aqualytic ET 108 Mode D'emploi page 10

1. COD-Reactor ET 108
It is possible to change the values of temperature or time in any phase of the heating
cycle. In this case the instrument starts again from zero and does not consider anymore
the first choice.
4. The reactor is equipped by two retarded fuses (one spare) enclosed into the safety
plug located on rear panel.
5. To clean the instrument we suggest to use tissue moinstened with ethanol after dis-
connecting the plug from power.
6. The apparatus is planned and assembled according to safety standard IEC 1010 (1990)
and modification 1 (1991).
Power
Weight
Supply
Supply
148
Temp.
°C
100
?
120
Time
(min.)
80
30
350 W
2,15 kg
230 V / 50 Hz code 10.0127
115 V / 60 Hz code 10.1127
Heat on /
Heizung
Schalter
/ Switch
ET 108
10
133 mm