Alarms - Belkin PureAV AP30800fc10-BLK Guide D'utilisation

Alarms

Battery Backup (Slow Alarm)
When the Belkin PureAV Battery Backup is in battery-backup mode, the
"Battery On" LED (green) illuminates and the Belkin PureAV Battery
Backup sounds an audible alarm. The alarm stops when the Belkin PureAV
Battery Backup returns to normal online operation.
Low Battery (Rapid Alarm)
When the Belkin PureAV Battery Backup is in battery-backup mode and
the battery's energy begins to run low, the Belkin PureAV Battery Backup
will beep rapidly until it shuts down from a depleted battery or returns to
online normal operation.
Overload (Continuous alarm)
When the Belkin PureAV Battery Backup is overloaded (the connected
loads exceed the maximum rated capacity), the Belkin PureAV Battery
Backup emits a continuous alarm to warn of an overload condition.
Disconnect nonessential equipment from the Belkin PureAV Battery
Backup to eliminate the overload.
4